Latchford structural steelwork
Blades Building — a Warrington-based Ltd company covering Latchford and the wider Cheshire area. Rated 10/10 on Checkatrade across 36 reviews.
If you're in Latchford and thinking about structural steelwork, you're roughly 1 miles south of Warrington centre of Warrington town centre, which puts you inside the practical service radius we cover from Westbrook. Andy comes out personally to look at the property — usually within a week of the first call — and gives an honest read on what's involved before you commit to drawings or a quote.
Working around Latchford
- Latchford sits in Cheshire under Warrington Borough Council, on the WA4 postcode.
- Access is via A50 Knutsford Road, roughly 1 miles south of Warrington centre of Warrington town centre.
- The housing stock we typically work on here is victorian two-up two-down terraces, which affects how we price and sequence structural steelwork.
- Latchford Locks is a well-known local reference point — we've worked on projects within walking distance.
What structural steelwork usually looks like around Latchford
removing a load-bearing wall between kitchen and dining room
wide-span openings for bi-fold and sliding doors
chimney breast removal with gallows brackets or steel support
goalpost frames replacing full rear walls on extensions
loft conversion floor beams and dormer trimmers
How a Latchford structural steelwork job runs
Engineer's calcs
We work from your structural engineer's design (or arrange one).
Temporary support
Acrows, needles and strong-boys transfer load before cutting.
Install
Beam lifted in, bearings dry-packed, pad-stones set.
Sign-off
Building Control inspection, then encase, plaster and finish.
Things we flag on Latchford projects
- structural engineer's calcs and Building Control notification
- temporary support strategy before cutting the existing wall
- pad-stone sizing to spread point loads into masonry
- fire protection where the steel is exposed or boxed in
- party wall implications when the steel bears on a shared wall
Also working near Latchford
Latchford sits close to Stockton Heath, Wilderspool, Grappenhall — we cover those and the wider Cheshire area for structural steelwork.
Latchford structural steelwork — questions we're asked
How do you get a steel beam onto a tight Latchford street?
We size the beam to be handled through the property wherever possible. On tight-access jobs off A50 Knutsford Road or in the older terraces near Latchford Locks we've split spans and used mobile plant when needed.
Do I need a structural engineer, or do you handle that?
You need a qualified engineer's calculations for Building Control. We work with several local engineers routinely and can arrange it for you.
Do steel installs in Latchford need Building Regs approval?
Yes. Any removal of load-bearing structure has to be notified to Building Control at Warrington Borough Council, inspected before enclosure, and signed off at completion.
How long does a knock-through take?
A single opening with one steel is typically 3–5 days on site including making-good, though it depends on the span and what's in the wall above.
Do the steels need fire protection?
In a domestic single-family dwelling most exposed steels need 30 minutes' fire resistance — either intumescent paint or plasterboard encasement.
Get a quote for structural steelwork in Latchford
Free site visit from Andy, honest advice on what's possible and a written quote. No pushy follow-ups.