Structural Steelwork across Runcorn (WA7)
Blades Building — a Warrington-based Ltd company covering Runcorn and the wider Cheshire (Halton) area. Rated 10/10 on Checkatrade across 36 reviews.
We do a lot of structural steelwork in Runcorn. The pattern in WA7 tends to be removing a load-bearing wall between kitchen and dining room — often part of a wider layout change rather than a standalone job — and being a small Ltd company means the same team is on site from strip-out through to hand-over, not a rotating crew of subs.
Working around Runcorn
- Runcorn sits in Cheshire (Halton) under Halton Borough Council, on the WA7 postcode.
- Access is via M56 J12 and the Mersey Gateway, roughly 8 miles south-west of Warrington of Warrington town centre.
- The housing stock we typically work on here is new-town estates plus older sandstone terraces, which affects how we price and sequence structural steelwork.
- Silver Jubilee Bridge is a well-known local reference point — we've worked on projects within walking distance.
What structural steelwork usually looks like around Runcorn
removing a load-bearing wall between kitchen and dining room
wide-span openings for bi-fold and sliding doors
chimney breast removal with gallows brackets or steel support
goalpost frames replacing full rear walls on extensions
loft conversion floor beams and dormer trimmers
How a Runcorn structural steelwork job runs
Engineer's calcs
We work from your structural engineer's design (or arrange one).
Temporary support
Acrows, needles and strong-boys transfer load before cutting.
Install
Beam lifted in, bearings dry-packed, pad-stones set.
Sign-off
Building Control inspection, then encase, plaster and finish.
Things we flag on Runcorn projects
- structural engineer's calcs and Building Control notification
- temporary support strategy before cutting the existing wall
- pad-stone sizing to spread point loads into masonry
- fire protection where the steel is exposed or boxed in
- party wall implications when the steel bears on a shared wall
Also working near Runcorn
Runcorn sits close to Halton, Weston Point, Sandymoor — we cover those and the wider Cheshire (Halton) area for structural steelwork.
Runcorn structural steelwork — questions we're asked
Do the steels need fire protection?
In a domestic single-family dwelling most exposed steels need 30 minutes' fire resistance — either intumescent paint or plasterboard encasement.
How do you get a steel beam onto a tight Runcorn street?
We size the beam to be handled through the property wherever possible. On tight-access jobs off M56 J12 and the Mersey Gateway or in the older terraces near Silver Jubilee Bridge we've split spans and used mobile plant when needed.
Do steel installs in Runcorn need Building Regs approval?
Yes. Any removal of load-bearing structure has to be notified to Building Control at Halton Borough Council, inspected before enclosure, and signed off at completion.
Do the steels need fire protection?
In a domestic single-family dwelling most exposed steels need 30 minutes' fire resistance — either intumescent paint or plasterboard encasement.
How do you get a steel beam onto a tight Runcorn street?
We size the beam to be handled through the property wherever possible. On tight-access jobs off M56 J12 and the Mersey Gateway or in the older terraces near Silver Jubilee Bridge we've split spans and used mobile plant when needed.
Get a quote for structural steelwork in Runcorn
Free site visit from Andy, honest advice on what's possible and a written quote. No pushy follow-ups.